Inc.VATEx.VAT
Contact usInc.VATEx.VAT
See more Jointing compound
Volden Ready mixed Plasterboard Jointing, filling & finishing compound 10kg 6.5L Tub
£
Inc.VAT19
£
19
per kg
Checking availability...
Product details
Product information
The strength in this ready mixed formulation make is perfect for those not wishing to use scrim tape. Gypsum based with a higher polymer content this product has been designed for jointing plasterboards when drylining and for use on areas that are more. susceptible to cracking. Easy to sand in preparation for decorating
- Using a trowel or jointing knife apply the compound at an angle to ensure the compound is fully pressed into the joints. Once the first coat has dried, apply a second. Once set hard, rub down using sandpaper. Note this is harder to sand due to the stronger polymers used. Brush or wipe down to remove any dust created from sanding. Apply a primer before decorating.
- Designed for jointing plasterboards when drylining and and for use on areas that are more suceptble to cracking. Easy to sand in preparation for decorating
- Keep out of reach of children and animals. Inhalation of dust must be avoided. The work area must be ventilated or move to fresh air. A suitable face mask should be worn if sanding. Dust may be an irritant to eyes, sensitive skin or respiratory system. If irritation persists seek medical advice. Ingestion should be avoided. If ingested, rinse mouth with clean water and seek medical advice.
Features and benefits
- Stronger formulation. Perfect for filling, smoothing walls, ceilings and plasterboard repairs in areas more susceptible to movement
- Ready Mixed
- Easy to sand
- High cracking resistance
- High adhesion to most building surfaces
- Suitable for use around doors & windows
- This plaster's white colour ensures a lower number of coats while painting
- Can be stored and reused at a later date (see use by date on packaging)
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
Specifications
Application method | Trowel or filling knife |
---|---|
Colour | White |
Coverage | 6.5m² |
Drying time | 1-2 h |
Location | Internal |
Maximum application temperature | 40°C |
Minimum application temperature | 10°C |
Number of coats | 2 |
Paintable | Paintable |
Product weight | 10kg |
Sandable | Sandable |
Setting time | 120min |
Standard | TS EN 13963 |
VOC level | No VOC level recorded |
Volume | 6.5L |
Product code | 5063022091482 |